The Highest
Performing
Epoxies
Epoxy 100 Clear
PPC Epoxy 100 is a solvent-free, low-odor, two-component epoxy coating with excellent UV resistance and minimal yellowing over time. It delivers superior mechanical and chemical performance with a high-quality aesthetic finish for residential and commercial applications. Suitable as a topcoat, base coat, or primer.
Epoxy 100 Pre-pigmented
This product maintains the identical high-performance formulation of Epoxy 100 Clear while offering a pre-pigmented finish available in Black, White, Light Gray, Medium Gray, Dark Gray, and Tan.
MBV (Moisture Vapor Barrier)
PPC MVB (Moisture Vapor Barrier) is a transparent two-component epoxy, comprising 100% solids with a mild scent and low viscosity. It is specially designed as a moisture barrier coating for treating both new and existing concrete floors exhibiting elevated moisture levels and high ph.
.jpg)
Topcoats
Polyaspartic 85
Our cutting-edge coating system, referred to as PPC Polyaspartic 85, stands as a versatile two-component solution, featuring a balanced 1:1 ratio. This product serves the dual purpose of being a colored basecoat and a crystal-clear topcoat.
WB Polyurethane Clear
PPC Water Based Polyurethane is a single-component, water-based polyurethane coating system specially design to protect and enhance the appearance of various types of surfaces.
Polyaspartic 70
PPC Polyaspartic 70 is a premium, two-component aliphatic polyaspartic polyurea formulated with advanced proprietary nanotechnology. It provides a high-gloss, clear finish with exceptional penetration and adhesion , delivering long-term resistance to abrasion, impact, wear, chemical splashes, and hot-tire pickup protection.
Aqua Acrylcoat 25
PPC Aqua Acrylcoat 25 is a low-odor, low-VOC, non-yellowing water-based acrylic sealer used for curing and sealing applications. This breathable, self-crosslinking coating provides a low-to-medium gloss finish on masonry while offering tough adhesion and excellent resistance to alkali exposure.
Acrylcoat 30
PPC Acrylcoat 30 is a high-gloss, UV-resistant solvent-based acrylic sealer for concrete surfaces. It protects against environmental damage and stabilizes aggregate , acting as a clear , single component cure-and-seal for new concrete while effectively reducing premature surface wear over time.
Polyureas
.jpg)
421 Hybrid Polyurethane Polyurea (5G Kit)
PPC Hybrid Polyurethane Polyurea 421 is a fast-gelling coating suitable for low temperatures, applied up to 250+ mils in one pass, moisture-tolerant, requiring minimal surface preparation with Fusion Primer included.
_.jpg)
421 Hybrid Polyurethane Polyurea (1G Kit)
PPC Hybrid Polyurethane Polyurea 421 is a fast-gelling coating suitable for low temperatures, applied up to 250+ mils in one pass, moisture-tolerant, requiring minimal surface preparation with Fusion Primer included.
Poly Joint 82
PPC Poly Joint 82 is a two-component, aromatic, 1:1 ratio, rapid-setting, self-leveling, 100% solids polyurea caulking compound for interior and exterior horizontal applications, compliant with applicable VOC regulations, local codes.
Solvents
.jpg)
Denatured Alcohol (1G)
Serves as a solvent and fuel for alcohol burners and camping stoves; also thins shellac, lacquers, resins and specific inks.
.jpg)
Denatured Alcohol (5G)
Serves as a solvent and fuel for alcohol burners and camping stoves; also thins shellac, lacquers, resins and specific inks.
.jpg)
Xylene Xylol (1G)
Employed to thin specified oil-based paints, lacquers, varnished, epoxies, adhesives, anti-rust coatings, porch and deck paints, and synthetic enamels. Additionally, Xylene can remove certain adhesives ans derves as an excellent solvent for cleaning tools and equipment immediately after use.
.jpg)
Xylene Xylol (5G)
Employed to thin specified oil-based paints, lacquers, varnished, epoxies, adhesives, anti-rust coatings, porch and deck paints, and synthetic enamels. Additionally, Xylene can remove certain adhesives ans derves as an excellent solvent for cleaning tools and equipment immediately after use.
.jpg)
Acetone (1G)
An effective thinner and remover for epoxy resins, inks, adhesives, and lacquers. Acetone evaporates rapidly and leaves no residue. It is also suitable for cleaning dried latex paint, uncured lacquers and adhesives.
.jpg)
Cementitious
HP Self Level UL
PPC Self Level UL is used to create smooth flat and level surfaces for the installation of various flooring types, or the repair or leveling of low spots in concrete substrates. PPC Self Level UL creates a strong physical & chemical bond to a concrete substrate with the use of PPC Epoxy 100.
Krete Urethane Slurry
PPC Krete Urethane Slurry SL is a four components polyurethane self-level system. Attractive smooth matt colored floor finish. The high fluid efficiency allows for easy installation and high coverage performance in a short time.
Roofing
Others
Static E300 NT
PPC Static E300 NT is a two-component epoxy floor coating using NANOWISE TECHNOLOGY. It provides electrostatic grounding in sensitive environments while offering chemical resistance, durability, light reflectivity, and easy maintenance.
Shield SG Guard
PPC Shield SG Guard is a spray-applied, VOC-compliant sealer providing high-sheen etch and stain resistance. It protects various interior/exterior surfaces—including concrete, masonry, and stone—against chemical intrusion, grease, and oil.
Shield LS Densifier
PPC Shield LS Densifier is a zero-VOC, ready-to-use treatment that seals, hardens, and dustproofs concrete. This eco-friendly, permanent solution eliminates dusting and extends the lifespan of new or existing surfaces.
.jpg)
Universal Color Pack
PPC Universal Color Pack is designed to tint solvent-borne polyvinyl chloride, polyurethane, epoxide, organic-silicon, pentaerythritol modified phtalic resin, nitrocellulose and other system.
